Call Us: +86-532-88996981Email: vivian.li@sunlite-industrial.com
video
Forged Aluminum
Forged Aluminum
Forged Aluminum
Forged Aluminum
Forged Aluminum
1/2
<< /span>
>

CNC Machined Forged Aluminum

Archery risers and other parts of bows Arms & Ammunition products Clamps Crank shaft Electrical & Electronic parts Fasteners Fire Protection parts Gas Turbine Intakes Gear shaft Lighting Products & Parts Lock Hardware Marine & Boat Parts Motor parts



Here are some introduction to our forging products range and production process

Forging Advantages


High Strength

In making a forging, the metal is worked twice under tremendous pressures. First during rod extrusion, drawing or rolling and then during forging. The double working under pressure, compacts the metal, and produces a very dense and refined grain or fiber structure. The tensile strength of the parts is thereby increased, and resistance to impact and abrasion is enhanced.

Leak Resistance

The dense non-porous forged metal permits the designer to specify thinner sections without the risk of leaks. Often, the thinner forged parts result in lighter weight and lower piece cost compared to other manufacturing processes.

Close Tolerances

A forging produced in a steel die with close tolerances offers several advantages. Overall part dimensions are held closer than in sand casting. Dimensions show minimum variation from part to part allowing for automatic chucking and handling in subsequent operations. The precise designs on the die surface can produce sharp impressions on the forging surface. Which is normally not the case with other forming processes?

Low Overall cost

Mass production of forged parts lends itself to maximum savings. However, smaller quantities of copper alloy forgings can also prove economical when specific design parameters must be met. These requirements include leak integrity, close tolerances, high strength with low eight, and non-symmetrical shape

 

Specifications:

Workable metals

Aluminum Alloys, 6000 and 7000 series, others upon review

Forging Techniques

Closed Die Forging

Open Die forging

Precision Ring Rolling

Weight limits

Dependent upon the part configuration.

Press Tonnage

The press size is dependant on the alloy and size of the forging

Order Quantity

Minimum quantities relative to the weight of the part, No limits on large production orders

Typical Lead Time

Based upon material, profile and secondary operations, typically, samples for approval 5 to6wks, Air freight is also available for an expedited delivery

Compliances

All detailed specifications are on our web site or are available on request. Our forgings meet ASTM Specs all materials

Quality assurance

Chemistry Compliance

Elongation Testing

Full Dimensional Reports

Hardness Testing

Heat Treating

MTRS(material Test reports/material analysis reports

Optical comparator measuring

Tensile Strength Testing

Applications

Archery risers and other parts of bows

Arms & Ammunition products

Clamps

Crank shaft

Electrical & Electronic parts

Fasteners

Fire Protection parts

Gas Turbine Intakes

Gear shaft

Lighting Products & Parts

Lock Hardware

Marine & Boat Parts

Motor parts

Industries Served

Architectural

Bathroom

Door & Window

Fastener

Fire Prevention

Industrial OEM

Marine & Naval

Oil &Gas

Pump & Valve



Hot Tags: CNC Machined CNC Machined Forged Aluminum, China, suppliers, manufacturers, exporter, factory, price, OEM, cheap funeral urn, Metal Hemisphere, Machined Forging Parts, Copper Lamp Shade, flower pot big, Chimney Cover

Send Inquiry

(0/10)

clearall